3Com Switch 4800G 24-Port Configuration Manual page 105

Manual Voice VLAN
Mode Configuration
Example
[DeviceA-GigabitEthernet1/0/1] voice vlan enable
[DeviceA-GigabitEthernet1/0/1] return
Verification
# Display information about the OUI addresses, OUI address masks, and
descriptive strings.
<DeviceA> display voice vlan oui
Oui Address Mask
0001-e300-0000 ffff-ff00-0000
0003-6b00-0000 ffff-ff00-0000
0004-0d00-0000 ffff-ff00-0000
0011-2200-0000 ffff-ff00-0000
0060-b900-0000 ffff-ff00-0000
00d0-1e00-0000 ffff-ff00-0000
00e0-7500-0000 ffff-ff00-0000
00e0-bb00-0000 ffff-ff00-0000
# Display the current Voice VLAN state.
<DeviceA> display voice vlan state
Voice VLAN status: ENABLE
Voice VLAN ID: 2
Voice VLAN security mode: Security
Voice VLAN aging time: 100 minutes
Voice VLAN enabled port and its mode:
PORT
--------------------------------
GigabitEthernet1/0/1
<DeviceA>
Network requirement
Create VLAN 2 and configure it as a voice VLAN.
■
The voice traffic sent by the IP phones is untagged. Configure GigabitEthernet
■
1/0/1 as a Hybrid port and as the access port.
GigabitEthernet 1/0/1 works in manual mode. It only allows voice packets with
■
an OUI address of 0011-2200-0000, a mask of ffff-ff00-0000, and a descriptive
string of test to be forwarded through the voice VLAN.
Voice VLAN Configuration Examples
Description
Siemens phone
Cisco phone
Avaya phone
Philips/NEC phone
Pingtel phone
Polycom phone
3com phone
MODE
AUTO
105