3Com Switch 4800G 24-Port Configuration Manual page 171

Switch 4800g family 24-port, pwr 24-port, 48-port, pwr 48-port, 24-port sfp

Hide thumbs Also See for Switch 4800G 24-Port:

Table of Contents

Link Aggregation Configuration Example

<SwitchA> system-view

[SwitchA] link-aggregation group 1 mode static

# Add ports GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 to the group.

[SwitchA] interface GigabitEthernet 1/0/1

[SwitchA-GigabitEthernet1/0/1] port link-aggregation group 1

[SwitchA-GigabitEthernet1/0/1] interface GigabitEthernet 1/0/2

[SwitchA-GigabitEthernet1/0/2] port link-aggregation group 1

[SwitchA-GigabitEthernet1/0/2] interface GigabitEthernet 1/0/3

[SwitchA-GigabitEthernet1/0/3] port link-aggregation group 1

3 Configure a service loop group

# Create a manual aggregation group.

<SwitchA> system-view

[SwitchA] link-aggregation group 1 mode manual

# Specify this group to be a tunnel service loop group.

[SwitchA] link-aggregation group 1 service-type tunnel

# Assign port GigabitEthernet 1/0/1 to the service loop group.

[SwitchA] interface GigabitEthernet 1/0/1

[SwitchA-GigabitEthernet1/0/1] undo stp

[SwitchA-GigabitEthernet1/0/1] port link-aggregation group 1

Show Quick Links

Table of Contents

Troubleshooting