3Com Switch 4800G 24-Port Configuration Manual page 46

46 C 2: L I T C P
HAPTER OGGING N HROUGH THE ONSOLE ORT
[SW4800G-ui-aux0] authentication-mode scheme
# Set the baud rate of the console port to 19,200 bps.
[SW4800G-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[SW4800G-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store
to 20.
[SW4800G-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[SW4800G-ui-aux0] idle-timeout 6
After the above configuration, to ensure a successful login, the console user needs
to change the corresponding configuration of the terminal emulation program
running on the PC, to make the configuration consistent with that on the switch.
Refer to section "Setting Up the Connection to the Console Port" on page 31 for
more.