Telnet Configuration With Authentication Mode Being Password - 3Com Switch 4800G 24-Port Configuration Manual

52 C 3: L
HAPTER OGGING
Telnet Configuration
with Authentication
Mode Being Password
Configuration Procedure
I T T
N HROUGH ELNET
To do...
Enter system view
Enable the Telnet server
function
Enter one or more VTY user
interface views
Configure to authenticate
users logging in to VTY user
interfaces using the local
password
Set the local password
Configure the command level
available to users logging in
to the user interface
Configure the protocol to be
supported by the user
interface
Set the command that is
automatically executed when
a user logs into the user
interface
Define a shortcut key for
aborting tasks
Make terminal services
available
Set the maximum number of
lines the screen can contain
Set the history command
buffer size
Use the command...
system-view
telnet server enable
user-interface vty
first-number
[ last-number ]
authentication-mode
password
set authentication
password { cipher |
simple } password
user privilege level level Optional
protocol inbound { all |
ssh | telnet }
auto-execute command
text
escape-key { default |
character }
shell
screen-length
screen-length
history-command
max-size value
Remarks
-
Required
-
Required
Required
By default, commands of level 0
are available to users logging in to
VTY user interface.
Optional
By default, both Telnet protocol
and SSH protocol are supported.
Optional
By default, no command is
automatically executed when a
user logs into a user interface.
Optional
The default shortcut key
combination for aborting tasks is <
Ctrl+C >.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function
to display information in pages.
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.