Displaying And Maintaining Link Aggregation - 3Com Switch 4800G 24-Port Configuration Manual

Configuring a Service
Loop Group
Entering Aggregation
Port Group View
Displaying and
Maintaining Link
Aggregation
To do...
Configure a name for a link
aggregation group
Follow these steps to configure a service loop group:
To do...
Enter system view
Create a manual aggregation group
Specify the aggregation group as a
service loop group that is of specific type
Enter Ethernet port view
Add the Ethernet port to the
aggregation group
n
You can remove any service loop group except those that are currently
■
referenced by modules.
For a service loop group containing only one port, the only way to remove the
■
port from it is to remove the service loop group.
In aggregation port group view, you can make configuration for all the member
ports in a link aggregation group at one time.
Follow these steps to enter aggregation port group view:
To do...
Enter system view
Enter aggregation port group view
c
CAUTION: In aggregation port group view, you can configure aggregation related
settings such as STP, VLAN, QoS, GVRP, Q-in-Q, BPDU tunnel, MAC address
learning, but cannot add or remove member ports.
To do...
Display the local system ID
Display detailed information about
link aggregation for the specified
port or ports
Display information about the
specified or all service loop groups
Display summaries for all link
aggregation groups

Displaying and Maintaining Link Aggregation

Use the command...
link-aggregation group
agg-id description agg-name
Use the command...
system-view
link-aggregation group agg-id mode
manual
link-aggregation group agg-id
service-type tunnel
interface interface-type
interface-number
port link-aggregation group agg-id
Use the command...
system-view
port-group aggregation agg-id
Use the command...
display lacp system-id
display link-aggregation
interface interface-type
interface-number [ to
interface-type interface-number ]
display link-aggregation
service-type [ agg-id ]
display link-aggregation
summary
169
Remarks
Required
None is configured by default.
Remarks
--
Required
Required
--
Required
Remarks
--
--
Remarks
Available in any view
Available in any view
Available in any view
Available in any view