Ipv6 Configuration Example; Ipv6 Unicast Address Configuration - 3Com 4200G 12-Port Configuration Manual

To do...
Display the statistics of IPv6
packets and IPv6 ICMP packets
Display the statistics of IPv6 TCP
packets
Display the IPv6 TCP connection
status
Display the statistics of IPv6
UDP packets
Clear IPv6 dynamic domain
name cache information
Clear IPv6 neighbor information
Clear the statistics of IPv6
packets
Clear the statistics of all IPv6
TCP packets
Clear the statistics of all IPv6
UDP packets
The display dns domain and display dns server commands are the same as those of IPv4 DNS. For
details about the commands, refer to DNS Operation in this manual.

IPv6 Configuration Example

IPv6 Unicast Address Configuration

Network requirements
Two switches are directly connected through two Ethernet ports. The Ethernet ports belong to VLAN 2.
Different types of IPv6 addresses are configured for the interface VLAN-interface 2 on each switch to
verify the connectivity between the two switches. The IPv6 prefix in the EUI-64 format is 2001::/64, the
global unicast address of Switch A is 3001::1/64, and the global unicast address of Switch B is
3001::2/64.
Network diagram
Figure 1-5 Network diagram for IPv6 address configuration
Use the command...
display ipv6 statistics
display tcp ipv6 statistics
display tcp ipv6 status
display udp ipv6 statistics
reset dns ipv6 dynamic-host
reset ipv6 neighbors [ all | dynamic | interface
interface-type interface-number | static ]
reset ipv6 statistics
reset tcp ipv6 statistics
reset udp ipv6 statistics
1-16
Remarks
Available in
user view