Telnet Configuration With Authentication Mode Being Scheme - 3Com Switch 4800G 24-Port Configuration Manual

54 C 3: L
HAPTER OGGING
Telnet Configuration
with Authentication
Mode Being Scheme
Configuration Procedure
I T T
N HROUGH ELNET
Configuration procedure
# Enter system view, and enable the Telnet service.
<SW4800G> system-view
[SW4800G] telnet server enable
# Enter VTY 0 user interface view.
[SW4800G] user-interface vty 0
# Configure to authenticate users logging in to VTY 0 using the local password.
[SW4800G-ui-vty0] authentication-mode password
# Set the local password to 123456 (in plain text).
[SW4800G-ui-vty0] set authentication password simple 123456
# Specify commands of level 2 are available to users logging in to VTY 0.
[SW4800G-ui-vty0] user privilege level 2
# Configure Telnet protocol is supported.
[SW4800G-ui-vty0] protocol inbound telnet
# Set the maximum number of lines the screen can contain to 30.
[SW4800G-ui-vty0] screen-length 30
# Set the maximum number of commands the history command buffer can store
to 20.
[SW4800G-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[SW4800G-ui-vty0] idle-timeout 6
To do...
Enter system view
Enable the Telnet server
function
Use the command...
system-view
telnet server enable
Remarks
-
Required