Canon iPF8300S User Manual page 812

Handling Paper >
Important
• For best printing results, the printer fine-tunes the print head height and the feed amount for each type of
paper. Be sure to select the type of paper to use correctly before printing.
• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printed
images may vary depending on the type of paper used. If margins and the size of images are not as you ex-
pected, adjust the paper feed amount.
(See "Adjusting the Feed Amount.")
Changing the Type of Paper
Note
• When you load a roll, a menu for selection of the type of paper is shown on the Display Screen. Select the
type of paper, and then press the OK button.
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll
length after the type of paper. (See "Specifying the Paper Length.")
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
6
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.
4.
Press ▲ or ▼ to select the type of paper loaded ( Roll Paper or Cut Sheet ), and then press the OK button.
5.
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
792
Changing the Type of Paper
Handling rolls >
Note
• If the Tab Selection screen is not displayed, press the Menu button.
Important
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause
feed errors and affect printing quality.
Note
• For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.")
default, Plain Paper is selected.
• If you move the Release Lever, the setting automatically reverts to the previously selected paper.
→P.856
→P.793
).
→P.774
By
iPF8300S