Keep Paper Size
Secure High Spd.
Print (Auto Del)
Save: Box XX
Print After Recv
Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead. (See "Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.).")
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check once
Select Warning > On to display warnings if the noz-
zles clog during printing.
Specify the scan width of the carriage during printing.
Select Automatic for movement equivalent to the
width of paper loaded. Selecting Fixed will reduce
any soiling on the back of the paper, although printing
may take a little longer.
Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Restores settings that you have changed with Media
Configuration Tool to the default values.
Erases file management data for print job data stored
on the printer's hard disk. (See "Erasing Data on the
Printer's Hard Disk.")
Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and ran-
dom data (one time each). Verification is performed to
check if the data was correctly written. (See "Erasing
Data on the Printer's Hard Disk.")
Select the printing method for jobs received from soft-
ware other than the printer driver. When using the
printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto
Del) will print the job and then delete the data from
the printer's hard disk. Selecting Save: Box 01 will
only save the print job in the box, without printing it.
A setting for jobs received from software other than
the printer driver. When using the printer driver, con-
figure settings on the printer. Select On to print the
job after it has been saved.