Insert the paper core, which serves as the spindle for rewinding a roll, on the Rewind Spool.
Push the flanges in firmly until the paper core is secured in place and push down the lever (a) toward the shaft.
Loading the Rewind Spool on the Media Take-up Unit
Media take-up unit
• Definitely load the same size of paper core in the Rewind Spool as that of the roll to be rewound.
Using a paper core of a different size may cause rewinding problems.
• After the flange is pressed strongly, confirm that the paper core does not move. If you can hold and
move the paper core leftward and rightward and there is clearance between the flange and paper core,
repeat procedures 2 to 4. If there is clearance, a rewinding problem may result.