Enabling Roll Take-Up - Canon iPF8300S User Manual

Handling Paper >
5.
Print on the roll.
6.
Turn off the Media Take-up Unit.
7.
Remove the printed document from the media take-up unit. (See "Removing Printed Documents from the Media
Take-up Unit (Optional).")
8.
Disable roll take-up. (See "Disabling Roll Take-Up.")
Important
• The Media Take-up Unit cannot be used with sheets.
• If you have attached the Output Stacker, always stow it before using the Media Take-up Unit. (See "Storing
the Output Stacker.")
• Position the Basket Cloth and Basket Rod so they do not interfere with the Media Take-up Sensor. This may
impair operation. (See "Storing the Output Stacker.")
• Rolls are not cut automatically when the Media Take-up Unit is used, regardless of the Cutting Mode setting
in the printer menu or the Automatic Cutting setting in the printer driver. However, you can cut paper by
pressing the Cut button.
• Color tones after printing may change during the ink drying period for some types of paper. Allow ample
drying time before the final check of colors, and do not remove printed documents from the Media Take-up
6
Unit too soon.
• In humid environments, documents printed using plenty of ink on relatively insubstantial media such as light-
weight Coated Paper may not be retracted evenly by the unit. In this case, take steps to control humidity in
the operating environment, or adjust the Roll DryingTime setting so that printed documents are retracted
after the ink has fully dried.
• In humid environments, documents printed on Fabric Banner or Synthetic Paper may not be retracted evenly
by the unit. In this case, take steps to control humidity in the operating environment, or adjust the Roll Dry-
ingTime setting so that printed documents are retracted after the ink has fully dried.

Enabling Roll Take-Up

1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
832
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Take-up Reel, and then press the OK button.
Enabling Roll Take-Up
Media take-up unit >
→P.842
→P.829
Note
• If the Tab Selection screen is not displayed, press the Menu button.
→P.833
→P.829
).
iPF8300S