Unidirectional Printing - Canon iPF8300S User Manual

Setting
Printer Default
None
1sec. / 3sec. / 5sec. / 7sec. / 9sec.
• Roll Paper Margin for Safety
Near End Margin
This sets the length of the near end margin of the roll paper.
Setting
Printer Default
5mm
20mm
• Cut Speed
This selects the auto cut speed.
Setting
Printer Default
Fast
Standard
Slow
• Calibration Value
When calibration has been carried out on the printer, use this setting to choose whether or not to use the results.
Setting
Printer Default
Use Value
Disregard Value
• Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with
the left and right sides inverted.

• Unidirectional Printing

Select this checkbox to prevent problems such as misaligned lines and improve the print quality. However, the printing
speed becomes slower.
• High-Precision Text and Fine Lines
Print increasing ink impact accuracy, particularly for sharper text and fine lines. However, this takes more time than
regular printing.
iPF8300S
Windows Software > Print Plug-In for Photoshop/Digital Photo Professional
The settings of the printer operating panel are applied.
The printing continues to the next line immediately after the last line.
The printing continues to the next line after the set time.
*For the media type that has problems, such as ink smears on the page or colors that
seem uneven during borderless printing etc., increase the value for this setting.
The settings of the printer operating panel are applied.
Print at a standard size.
*Select for Media Type that has no problem when printing with a standard size mar-
gin.
Select this when rubbing against the printhead occurs such as when using paper that
tends to curl.
The settings of the printer operating panel are applied.
Select this setting if cutting with the Standard setting is not clean.
Select this setting when you are not experiencing problems.
This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if
you select it when using adhesive paper.
The settings of the printer operating panel are applied.
The calibration results are used for printing.
The calibration results are not used for printing. Select this option to avoid changes
to image color tones during printing due to color calibration.
Details
Details
Details
Details
Paper Detailed Settings Dialog Box
>
3
329