Paper Size Not Detected - Canon iPF8300S User Manual

Error Message >
When Detect Mismatch in the Control Panel menu
is set to Pause or Warning, the width of the loa-
ded roll does not match the width specified in Fit
Roll Paper Width in the printer driver.

Paper size not detected.

Paper has been loaded askew, or warped paper has been loaded.
13
1098
Paper size not detected.
Messages regarding paper >
Cause
Cause
Corrective Action
Press ▲ or ▼ to select Stop Printing, and then press the OK
button.
Follow these steps to replace the roll to match the width speci-
fied in the printer driver.
1. Press ▲ or ▼ to select Change Paper, and then press the
OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2. Replace the paper with paper compatible for borderless print-
ing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed
when you select Fit Roll Paper Width in the printer driver
matches the width of the roll loaded in the printer, and then try
printing again.
Follow these steps to reload the roll.
1. Lift the Release Lever.
2. Adjust the right edge of the roll to make it
parallel to the right Paper Alignment Line.
3. If "Not finished printing. Finish printing
remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page
on which the error occurred.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.")
→P.782
Follow these steps to reload the sheet.
1. Lift the Release Lever.
2. Adjust the right edge of the sheet to make it
parallel to the right Paper Alignment Line and
the trailing edge of the sheet to make it paral-
lel to the paper alignment line under the Paper
Retainer.
3. If "Not finished printing. Finish printing
remaining jobs?" is shown on the Display
Screen, press the OK button.
→P.794
→P.797
→P.782
→P.786
Corrective Action
→P.786
iPF8300S