Other Problems; The Printer Does Not Go On; The Printer Takes Time To Start Up - Canon iPF8300S User Manual

Other problems

The printer does not go on ............................................................................................................................ 1087
The printer takes time to start up ................................................................................................................... 1087
If the Printer Makes a Strange Sound ........................................................................................................... 1088
Messages advising to check the maintenance cartridge are not cleared ...................................................... 1088
The printer consumes a lot of ink .................................................................................................................. 1088
Ink Level Detection ........................................................................................................................................ 1089

The printer does not go on

Cause
The printer is unplugged.
The specified voltage is not supplied.

The printer takes time to start up

The printer may have shut down incorrectly last time. This
may happen after power outages or if the printer is unplugged
before it is turned off.
In this case, the next time power is restored, the printer's hard
disk is checked, and startup may take some time.
iPF8300S
Plug the power cord into the outlet, and then turn on the printer.
Check the voltage of the outlet and breaker.
(See "Specifications.")
Cause
Troubleshooting
Corrective Action
→P.1123
Corrective Action
Please wait a while, because it may take several mi-
nutes to finish checking the hard disk.
If an error message is displayed after the hard disk
check, follow the instructions indicated to resolve the
problem.
> Other problems >
The printer does not go on
12
1087