Canon iPF8300S User Manual page 1002

Network Setting
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Frame Type
NCP Burst Mode
Print Application
Packet Signature
Bindery PSer-
ver
10
RPrinter
NDS PServer
982
NPrinter
Configuring the Printer's NetWare Network Settings With RemoteUI
> NetWare Settings >
Item
Specify the type of frame to use in NetWare.
Activate this setting to use NCP Burst Mode.
This mode supports fast data transfer when printing in queue
server mode. Normally, leave the setting On.
Choose the print service.
The print service selected here is enabled. Multiple print services
cannot be enabled simultaneously.
Select If Requested by Server to use packet signature.
File Server Specify the name of a file server that has a NetWare print server.
Name (0–47 characters)
Print Server Specify the name of a NetWare print server.
Name (0–47 characters)
Print Server Set a password for the print server.
Password (0–20 characters)
Polling Interval Specify the interval to confirm jobs.
(1–15 seconds)
Print Server Specify the name of a NetWare print server.
Name (0–47 characters)
Printer Number Specify the number of the printer connected to the NetWare print
server.
(0-15)
Tree Name Specify the name of an NDS tree that has a NetWare print server.
(0–32 characters)
Context Name Specify the name of a context that has a NetWare print server.
(0–255 characters)
Print Server Specify the name of a NetWare print server.
Name (0–64 characters)
Print Server Set a password for the print server.
Password (0–20 characters)
Polling Interval Specify the interval to confirm jobs.
(1–255 seconds)
Print Server Specify the name of a NetWare print server.
Name (0–47 characters)
Printer Number Specify the number of the printer connected to the NetWare print
server.
(0-254)
Details
• Bindery PServer
• RPrinter
• NDS PServer
• NPrinter
Default
Setting
Disabled
On
NDS
PServer
If Re-
quested
by Server
—
—
—
5
—
0
—
—
—
—
5
—
0
iPF8300S