Error Message
>
An error requiring service may have occurred.
Top cover is open.
The printer has detected that the Top Cover is
open.
Prepare for parts replacement.
It is almost time to replace consuma-
bles for which service is required.
Parts replacement time has passed.
It is past the recommended time to replace consumables for which service
13
is required.
Unknown file.
1120
Data sent to keep the printer up to date (such as
paper information) is in the wrong format.
You have uploaded firmware for a different
model.
Top cover is open.
Other Messages
>
Cause
Cause
Cause
Cause
Cause
Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact your
Canon dealer for assistance.
Open the Top Cover fully, remove any foreign objects, and close the
Top Cover again.
If the error occurs again, turn off the printer and wait a while before
restoring power.
Corrective Action
If "Parts replacement time has passed." is displayed, you can continue to
use the printer for some time.
Contact your Canon dealer for assistance.
Check the data. Turn off the printer and wait a while before restor-
ing power, and then resend the data.
Check the firmware version. Turn off the printer and wait a while
before restoring power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Corrective Action
Corrective Action
Corrective Action
Contact your Canon dealer for assistance.
Corrective Action
iPF8300S
Need help?
Do you have a question about the iPF8300S and is the answer not in the manual?