The Paper Is Too Small; Paprwidth Mismatch - Canon iPF8300S User Manual

Hide thumbs Also See for iPF8300S:
Table of Contents

Advertisement

Cause
When Detect Mismatch in the Control Panel
menu is set to Pause or Hold Job, paper small-
er than the size specified in the printer driver is
loaded.
When Detect Mismatch in the Control Panel
menu is set to Warning, paper smaller than the
size specified in the printer driver is loaded.

The paper is too small.

"Replace paper with A4/LTR (vertical) or larger"
Cause
The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.)
"Replace roll with 10 in. wide or larger roll."
Cause
The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.)

PaprWidth Mismatch

Cause
When Detect Mismatch in the Control Panel menu
is set to Pause or Warning, the width of the loa-
ded roll does not match the width specified in Fit
Roll Paper Width in the printer driver.
iPF8300S
Error Message
Corrective Action
1. Press ▲ or ▼ to select Change Paper, and then press the OK
button to stop printing.
2. Replace the loaded paper to match the paper width setting in the
printer driver and try printing again.
You can continue to print, but note that this error may cause prob-
lems in the printing results.
Corrective Action
Replace the paper with paper of A4/Letter (vertical) size or larger as fol-
lows.
1. Press ▲ or ▼ to select Change Paper, press the OK button, and re-
move the paper.
(See "Removing Sheets.")
2. Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Corrective Action
Replace the roll with a roll 10 inches in width or larger as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2. Replace the roll with a roll 10 inches wide or larger.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press ▲ or ▼ to select Print, and then press the OK button to
resume printing.
However, note that this error may cause paper jams and affect
the printing quality.
>
Messages regarding paper
→P.820
→P.9
→P.794
→P.797
→P.782
→P.786
Corrective Action
The paper is too small.
>
13
1097

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents