Paper mismatch ............................................................................................................................................ 1095
MediaType Mismatch ................................................................................................................................... 1096
The paper is too small. ................................................................................................................................. 1096
The paper is too small. ................................................................................................................................. 1097
PaprWidth Mismatch ..................................................................................................................................... 1097
Paper size not detected. ............................................................................................................................... 1098
Insufficient paper for job ............................................................................................................................... 1100
Roll printing is selected. ................................................................................................................................ 1101
The roll is empty. ........................................................................................................................................... 1101
No sheets. .................................................................................................................................................... 1102
Sheet printing is selected. ............................................................................................................................ 1102
Paper loaded askew. .................................................................................................................................... 1103
Cannot feed paper. ....................................................................................................................................... 1103
Cannot cut this paper. .................................................................................................................................. 1104
End of paper feed. ......................................................................................................................................... 1104
Rel lever is in wrong position. ........................................................................................................................ 1104
Rewinding error. ............................................................................................................................................ 1105
Media take-up unit ready. ............................................................................................................................. 1105
Turn on the media take-up unit. ..................................................................................................................... 1105
Paper mismatch
Cause
You tried to print a test pattern for
printer adjustment on several sheets,
but sheets of different types or sizes
of paper were used.
iPF8300S
Corrective Action
When printing a test pattern for adjustment, use sheets of the same size and
type of paper, in the required quantity.
Press ▲ or ▼ to select Change Paper, press the OK button, and replace the
paper.
(See "Loading and Printing on Sheets.")
The printer now starts printing the test pattern.
Replace the paper as follows and perform adjustment again.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Replace the paper.
(See "Loading and Printing on Sheets.")
3. Execute adjustment again from the control panel menu.
Error Message
>
Messages regarding paper
→P.9
→P.9
Paper mismatch
>
13
1095
Need help?
Do you have a question about the iPF8300S and is the answer not in the manual?