Paper Position Not Suitable For Borderless Printing - Canon iPF8300S User Manual

Error Message >
The print job received specifies a
type or width of paper that is not
compatible with borderless print-
ing.
The loaded paper is a size not
compatible with borderless print-
ing.

Paper position not suitable for borderless printing.

Because paper expands or contracts
depending on the environment of use,
it may become narrower or wider
than the supported width for border-
less printing.
13
The paper is loaded askew.
1106
Paper position not suitable for borderless printing.
Messages regarding paper >
Cause
Select None when you have set Detect Mismatch on the control panel to Warn-
ing.
However, note that this error may cause paper jams and affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to con-
tinue printing. The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
2. Replace the paper with paper compatible for borderless printing.
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to
the Paper Reference Guide.
(See Paper Reference Guide .)
Press ▲ or ▼ to select Print With Border, and then press the OK button to con-
tinue printing. The document will be printed with a border.
Cause
Corrective Action
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental condi-
tions are met. For details on environmental conditions for various paper, see
the Paper Reference Guide.
(See Paper Reference Guide .)
Select None when you have set Detect Mismatch in the Control Panel menu
to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Change Paper and straighten the paper so that the
edges are between the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
Select None when you have set Detect Mismatch in the Control Panel menu
to Warning.
However, note that this error may affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to
continue printing. The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
→P.794
→P.797
→P.782
→P.786
Corrective Action
→P.782
iPF8300S