Adjust The Colors While Checking The Preview (For Monochrome) - Canon iPF8300S User Manual

Windows Software
3.
Drag the slide bar in the direction of High in Yellow.
4.
Drag the slide bar in the direction of Low in Saturation.
5.
Drag the slide bar in the direction of Warm Black in Gray Tone.
6.
Click the Curves button then click near the center of the curve.
7.
Enter 120 in Input and 135 in Output then click the OK button.
3
8.
Click the Print button.
The adjustments are reflected in the image and printing begins.

Adjust the Colors while Checking the Preview (for Monochrome)

342
You can adjust the colors while checking the adjustments in the preview.
The following explanation is about the procedures for adjusting example image below.
• Low for Contrast
• Light for Highlight
• Light for Shadow
• Enhance brightness for the curves
The unapplied and the applied images of the above image adjustments are as below.
Adjust the Colors while Checking the Preview (for Monochrome)
> Print Plug-In for Photoshop/Digital Photo Professional
Note
• You can change the numbers by inputting in numerical characters.
• You can change the numbers by clicking either ▲ button or ▼ button.
>
iPF8300S