Execute printhead cleaning. ......................................................................................................................... 1114

Cannot adjust printhead.

Cause

The Printhead nozzles

are clogged.

The Printhead cannot

be aligned; highly

transparent film is

loaded.

PHeads: wrong pos.

Cause

The printheads are installed in the

wrong positions.

Wrong x printhead. (x is L, R, or not displayed)

Cause

An incompatible

Printhead has been in-

stalled.

iPF8300S

Execute Head Posi. Adj. again, as follows.

1. Press the OK button to clear the error.

2. Print a test pattern to check the nozzles.

(See "Checking for Nozzle Clogging.")

3. Clean the Printhead if the nozzles are clogged.

(See "Cleaning the Printhead.")

4. Execute Head Posi. Adj. again.

(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")

→P.850

Press the OK button to clear the error.

We recommend using a type of paper that you often use, other than film, for Printhead adjust-

ment.

(See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.).")

Open the Top Cover and switch the Printhead used once in the right side to the

right side. Switch the Printhead used once in the left side to the left side.

Open the Top Cover. Replace the Printhead L with a new one if Printhead L is displayed and

the Printhead R if Printhead R is displayed. If neither left or right is indicated, replace both

Printhead L and Printhead R with new ones.

(See "Replacing the Printhead.")

Error Message

Messages regarding printheads

Corrective Action

→P.1011

→P.1012

Corrective Action

→P.1013

→P.850

Cannot adjust printhead.

1113

Table of Contents

Show Quick Links

Hide quick links:

Chapters

Table of Contents

Messages Regarding Printheads; Cannot Adjust Printhead; Pheads: Wrong Pos; Wrong X Printhead. (X Is L, R, Or Not Displayed) - Canon iPF8300S User Manual