Configuring The Printer Driver Destination (Mac Os X); Configuring The Printer's Tcp/Ip Network Settings With Remoteui - Canon iPF8300S User Manual

Network Setting
9.
Follow the instructions on the screen to add a printer port.
10.
Click Close to close the Printer Ports dialog box.
11.
Make sure the printer port you added is displayed under Ports, and that the port is selected.
12.
Click Close to close the printer properties window.

Configuring the Printer Driver Destination (Mac OS X)

Specify the printer driver destination as follows if the printer's IP address is changed, or if you will use the printer over a
network connection instead of via USB connection.
• If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the Destina-
tion in TCP/IP Networks ."
• If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network ."

Configuring the Printer's TCP/IP Network Settings With RemoteUI

Follow the steps below to configure the TCP/IP network settings.
When using an IPv4 IP address
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
10
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
970
TCP/IP Settings Items
Item
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dy-
namic Update
Configuring the Printer Driver Destination (Mac OS X)
> Initial Settings >
→P.984
Activate this setting to use DHCP for configuring the IP address.
Activate this setting to use BOOTP for configuring the IP address.
Activate this setting to use RARP for configuring the IP address.
Activate this setting to perform DNS server registration automati-
cally.
Details
→P.986
Default Setting
Off
Off
Off
Off
iPF8300S