Cf Card Insertion And Removal - Fujitsu IP-900E Hardware User's Manual

2.6
2.6
IP-900D/IP-900IID doesn't support CF card slot.
In order to insert the CF card, the front cover of IP-900E must be opened by screwing out the cover.
No storage card is supplied with IP-900E. It can be procured separately, depending on the system.
The CF card removal procedure is shown below.
Please turn off the power to insert or remove the CF card.
(1) Check if the power is OFF.
(4) Press the eject button and remove the CF card.
(5) Replace CF card and cover it.
Please contact Fujitsu office what type of CF card is available to use.

CF Card Insertion and Removal

(2) Screw out.
(3) Remove the cover.
Eject button
CF card
※CF card is unequipped initially (Separate order).
Chapter 2 Installation and Connection
43
IP-900E/IP-900D/IP-900IID