Bridge Mode - NetComm G.SHDSL 4-port Security Modem Routers NB712 User Manual

7.1 Bridge Mode

Before configuring the router in bridge mode, check with your ISP to ensure you have the necessary information.
Click Bridge and CPE Side to setup Bridging mode of the Router and then click Next.
Two SHDSL modes are available: CO, Central Office, and CPE, Customer Premises Equipment. For a connection
with a DSLAM, the correct SHDSL mode is CPE. For a LAN to LAN connection, one side must be CO and the other
side must be CPE.
LAN Parameters
Enter IP:
Enter Subnet Mask:
Enter Gateway:
Enter Host Name:
Some ISPs will require the host name as identification. You may need to check with your ISP to see if your Internet
service has been configured with a host name. In most cases, this field can be ignored.
22
192.168.1.1
255.255.255.0
192.168.1.254
The Gateway IP is provided by ISP.
SOHO
NB712 / NB714 User Guide
YML829 Rev1