Static Settings; Dhcp Settings; Bridge Settings; Clip Settings - NetComm NB4 User Manual

Static Settings

Encapsulation:
IP Address:
Netmask:
Default Gateway:
DNS:
Mode:

DHCP Settings

Encapsulation:
IP Address:
Netmask:
Default Gateway:

Bridge Settings

Encapsulation:

CLIP Settings

IP Address:
Netmask:
ARP Server:
Default Gateway:
YML733 Rev1
www.netcomm.com.au
Select the method of encapsulation used by your ISP from the drop-
down list box. Choices vary depending on the mode you select in the
Mode field.
Private IP address for connecting to a local private network (Default:
192.168.1.1).
Netmask for the local private network (Default: 255.255.255.0).
This field is optional. Enter in the IP address of the router on your
network.
Sets the IP address of the DNS server.
Bridged and Routed
Select the method of encapsulation used by your ISP from the drop-
down list box. Choices vary depending on the mode you select in the
Mode field.
Private IP address for connecting to a local private network (Default:
192.168.1.1).
Netmask for the local private network (Default: 255.255.255.0).
This field is optional. Enter in the IP address of the router on your
network.
Select the method of encapsulation used by your ISP from the drop-
down list box. Choices vary depending on the mode you select in the
Mode field.
Private IP address for connecting to a local private network (Default:
192.168.1.1).
Netmask for the local private network (Default: 255.255.255.0).
Translating an IP address to an ATM address.
This field is optional. Enter in the IP address of the router on your
network.
NB4 User Guide
27