Print Density; Using The Manual Feeder - Konica Minolta 9825 User Manual

Printing from the PC

Using the Manual Feeder

Press Æ until the desired setting displays: Auto select, Use upper tray
4
only, Use lower tray only .
5
Press Enter.
6
You may select another option or press Stop to go to standby.

Print Density

FastAccess: M36
(Default = 3)
Use this feature to set the density for printing faxes, copies and reports.
1
Press Menu.
2
Press 3 to select the Printer Menu.
3
Press 6 to select the Print density menu option.
4
Type a number for the print density. Use 1 for the lightest printing and 5 for
the darkest printing.
5
Press Enter.
6
You may select another option or press Stop to go to standby.
Using the Manual Feeder
Use the manual feeder for the following special papers:
Labels
Transparencies
Envelopes: Commercial #10, 4.125 x 9.5" (105 x 241 mm)
To open the manual feeder
1
Press the 2 lower corners of the feeder. This will unlock the feeder and
allow it to drop down into place.
2
Place documents into the manual feeder face down.
3
Adjust the paper guides to the width of the paper or document you have
loaded.
140
Konica Fax 9825 User's Manual
__Print_density__
Print density:
¾
3
Enter number 1-5