Data Coupler Information - Konica Minolta 9825 User Manual

Table of Contents

Advertisement

Never defeat interlock switches. Machines are designed to not allow operator access to
unsafe areas. Covers, guards, and interlock switches are provide to ensure that the
machine will not operate with covers opened.
WARNING: During normal operation, this machine will produce ozone gas. The amount
of ozone produced does not present a hazard to the operator. However, it is advisable
that the machine be operated in a well-ventilated area.

Data Coupler Information

The Konica Fax 9825 machine contains an internal data coupler. Its use is restricted by
the FCC (Federal Communication Commission). To comply with the FCC rules, you
must carefully read and follow the instructions listed below.
This equipment complies with Part 68 of the FCC rules. On the rear of this equipment
is a label that contains, among other information, the FCC registration number and the
Ringer Equivalence Number (REN). If requested, provide this information to your
telephone company.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have all of those devices ring when your number is called. In
most, but not all areas, the sum of the RENs of all devices should not exceed five (5).
To be certain of the number of devices you may connect to your line, as determined by
the REN, you should call your local telephone company to determine the maximum
REN for your calling area.
WARNING: Ask your local telephone company for the modular jack type installed on
your line. Connecting this machine to an unauthorized jack can severely damage
telephone company equipment. You, not Konica, assume all responsibility and/or
liability for any damage caused by the connection of this machine to an unauthorized
jack.
You may safely connect the machine to the following standard modular jack: USOC RJ-
11C. Use the standard line cord (with modular plugs) provided with the installation kit to
connect it.
Do not connect this machine to a party or coin operated phone line.
Repairs to the machine should only be made by Konica or an authorized Konica service
agency or dealer. This applies at any time during or after the service warranty period. If
unauthorized repair is performed, the remainder of the warranty period is null and void.
If you find the telephone line is damaged or the telephone company notifies you that
your machine is causing damage, disconnect the machine from the telephone line and
call for service. Do not reconnect the machine until necessary repairs are made.
2
Konica Fax 9825 User's Manual

Advertisement

Table of Contents
loading

Table of Contents