Table of Contents
Advertisement
Data entry
3
Data entry
3.1
Preparation
Before you can operate all the functions on your fax machine, you must
enter several settings. This chapter explains how to set your name, your
line type and the remote locations with which you may wish to
communicate.
You can always interrupt the process by pressing [STOP]. The setting will
then not be saved. If you do not press any key for more than 30 seconds,
the procedure is interrupted and the system will return to stand by.
3.2
Typing conventions in this manual
If nothing else is requested, all keys are to be pressed one after the other.
This is also the case if they are connected by a "+" to facilitate the layout.
"Press [0] + [5] + [YES]" means: Press the numeric key [0], then the
numeric key [5] and then the key named [YES].
3.3
Enter text
You can use the one-touch keys to enter characters. To enter special
characters, follow the instructions given in the tables below. Press [YES]
to save the relevant setting. To add a space, press speed dial key [31]. In
case of a mistake you can move the cursor with the arrow keys
[JOURNAL] and [SCHEDULE] and overwrite the wrong text. Also you can
delete text with [DELETE]. Press the one touch key [32], to switch from
capital letters to small letters.
Minoltafax 2800/3800
3
3-1
Advertisement
Table of Contents
Troubleshooting
