Installing The Ribbon Cassette - NCR 7167 Owner's Manual

7167 Owner's Manual

Installing the Ribbon Cassette

1. Tighten the ribbon by turning the knob in the direction of the arrow.
2. Position the ribbon cassette slot at the catch on the printer slip frame and push it into place.
Be sure the ribbon is in front of or underneath the print head and between the print head and the
ribbon shield.
Tighten the ribbon using the shaft at the upper left corner of the cassette. Rotate the shaft
clockwise until the ribbon is positioned between the print head and the metal ribbon guide.
3. Close the front cover.
1
17
Cantilever Frame
Slot
Chapter 3: Solving Problems
Catch
Slot
Front
Cover
November 2003
2
Catch
Slot
3