Select Horizontal Size Of Bar Code (Receipt Station) - NCR 7156 Owner's Manual

7156 Owner's Guide
Second Variation: Length of Byte Specified at Beginning of String
Hexadecimal
1D 6B m [d]n
m = 65-71, 73 (see the table)
d =0-127 (see the table)
n = 1-255 (see the table)
The value of m selects the bar code system as described in the table. When data is present
in the print buffer, the printer processes the data following m as normal data.
The variable d indicates the character code to be encoded into the specified bar code
system. See the table. If character code d cannot be encoded, the printer prints the bar code
data processed so far, and the following data is treated as normal data.
m
65
66
67
68
69
70
71
73

Select Horizontal Size of Bar Code (Receipt Station)

Sets the bar code width to n dots or n/152 inch (n/6 mm).
Hex
1D 77 n
Decimal
29 107 m [d]n
Bar Code d
UPC-A 48- 57 (ASCII numerals)
UPC-E 48- 57
JAN13 (EAN) 48- 57
JAN8 (EAN) 48- 57
CODE39 48- 57,
65- 90 (ASCII alphabet),
32, 36, 37, 43, 45, 46, 47 (ASCII
special characters)
d1 = dk = 42 (start/stop code is
supplied by printer if necessary)
Interleaved 2 of 5 48- 57
(ITF)
CODABAR (NW-7) 65- 68, start code
48- 57,
36, 43, 45, 46, 47, 58
Code 128* 0-105
d1 = 103-105 (must be a Start code)
d2 = 0-102 (data bytes)
(Stop code is provided by the
printer)
Decimal ASCII
29 119 n GS w n
ASCII
GS k m [d]n
Value of Defaul
n t
2, 3, 4 3
September 1997
Chapter 6: Commands
n , Length
Fixed Length: 11, 12
Fixed Length: 11, 12
Fixed Length: 12, 13
Fixed Length: 7, 8
Variable
Variable
(Even Number)
Variable
Variable
101