Setting The Clock Shift For The Micro Computer Clock Type Function; Setting A Time Interval For Saving Gps Position Information; Permitting/Prohibiting Transfer Of Home Channel Frequency To Vfo - Yaesu FT2DR Operating Instructions Manual

Setting the Clock Shift for the Micro Computer
Clock Type Function
Set the micro computer Clock Shift function may be activated to eliminate an internally
generated spurious high frequency signal. Select [A] for normal use.
1
Touch [5 CLOCK TYPE].
2
Rotate the DIAL to select the desired setting.
A Automatically switches the Clock Shift function between on/off.
B Activates the Clock Shift function constantly.
Remark The default setting: A

Setting a Time Interval for Saving GPS Position Information

Set the interval at which the current position GPS information is saved to the microSD
memory card.
1
Touch [6 GPS LOG].
2
Rotate the DIAL to select the time interval:
OFF / 1 SEC / 2 SEC / 5 SEC /10 SEC / 30 SEC / 60 SEC
If OFF is selected, no GPS Information is saved onto the microSD memory card
Remark The default setting: OFF
Tips
• Data saved onto the microSD memory card is saved in GPSyymmddhhmmss.LOG format.
• Saved data may be viewed by using OEM PC applications*.
* Yaesu does not provide technical support for PC applications.

Permitting/Prohibiting Transfer of Home Channel Frequency to VFO

Set whether or not to permit tuning off of the home channel and transfer to the VFO.
1
Touch [7 HOME VFO].
2
Rotate the DIAL to select the desired setting.
ENABLE Turning the DIAL in home channel transfers from the home channel
frequency to the VFO.
DISABLE Turning the Dial on the home channel does not switch to the VFO.
Remark The default setting: ENABLE
Using the LED Light
Set Mode: CONFIG Menu Operations
147