Set Mode: Memory Menu Operations; Setting Memory Bank Link; Assigning Name To Memory Bank; Assigning Name To Memory Channel - Yaesu FT2DR Operating Instructions Manual

Set Mode: MEMORY Menu Operations

Press and hold the
[MEMORY] to set the individual items.
After completing the setup, press

Setting Memory Bank Link

You can link multiple registered memory banks so that you can recall frequently used
memory banks immediately.
1
Touch [1 BANK LINK].
2
Rotate the DIAL to select the memory bank you want to link, then press the
The checkbox is checked.
3
Repeat step 2 to link the memory banks one by one from BANK 1 to BANK 24.

Assigning Name to Memory Bank

By selecting [2 BANK NAME], you can assign a name to each memory bank using up to
16 characters.
For details, see "Assigning Name to Memory Bank" on page 64.

Assigning Name to Memory Channel

By selecting [3 MEMORY NAME], you can assign a name such as a call sign and
broadcast station name to each memory channel and home channel.
For details, see "Using Memory Tag" on page 59.
136
key for over one second to display "SETUP MENU", then touch
to exit from Set mode.
key.