Using the Set-up Menu
Tone signal settings
Setting the squelch tone frequency (CTCSS)
The tone frequency can be set. Refer to "Setting the tone frequency" (
Setting the DCS code
The DCS code can be set. Refer to "Setting the DCS code" (
Setting the transmission method of the DTMF code
The transmission method of the registered DTMF code can be set.
Refer to "Transmitting registered DTMF code" (
Registering the DTMF code
Telephone numbers used when connecting to a public line from a phone patch can be
registered using a DTMF code up to a maximum of 16 digits.
Refer to "Registering the DTMF code" (
Recalling only specified stations
The function for calling only specified stations using the pager code can be set.
Refer to "Using the pager function" (
Setting the user programmed reverse CTCSS tone
The frequency of the user programmed reverse CTCSS tone squelch can be set at100 Hz
intervals between 300 Hz and 3000 Hz
1
Press
for one second or longer
The set-up menu will be displayed.
2
Touch [SIGNALING]
3
Select and touch [6 PRG REV TONE]
The characters of the set value will turn orange in
color.
180
P.113) for details.
P.112) for details.
P.106) for details.
P.102) for details.
P.104) for details.