Setup Menu Operations: 2 Tx/Rx; Setting The Modulation Mode (1 Analog Mode Select); Setting The Microphone Sensitivity (2 Mic Gain); Setting The Transmission Mode When Using The Ams Function (3 Ams Tx Mode) - Yaesu FTM-100DR Operating Manual

Setup menu operations: 2 TX/RX

Setting the modulation mode (1 ANALOG MODE SELECT)

You can select the modulation mode in analog mode.
For details, see "Switching the modulation mode" on page 40.

Setting the microphone sensitivity (2 MIC GAIN)

You can set the microphone sensitivity (microphone gain).
For details, see "Adjusting the microphone sensitivity" on page 42.
Setting the transmission mode when using the AMS function
(3 AMS TX MODE)
You can select the transmission mode when using the AMS function.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [2 TX/RX], then press
.
3
Rotate the DIAL to select [3 AMS TX MODE], then
press .
4
Rotate the DIAL to select the desired transmission
mode.
for over one second.
125