2 DIGITAL
1 Setting the AMS transmission mode
When operating in the AMS function, the transmit mode may be selected:
1. Press and hold the [F(SETUP)] key [TX/RX] [2 DIGITAL] [1 AMS TX MODE]
2. Press the DIAL knob to select the AMS transmit mode.
AUTO
TX FM FIXED
TX DN FIXED
The default setting: AUTO
For details, refer to the Operating Manual.
2 Setting the Pop-up Time of the Remote Station Information
Set the time duration to display the remote station information (such as the call sign) on
the LCD.
1. Press and hold the [F(SETUP)] key [TX/RX] [2 DIGITAL] [2 DIGITAL POP-
UP]
2. Rotate the DIAL knob to select the desired setting.
OFF
2 sec - 60 sec
CONTINUE
The default setting: 10 sec
3 Setting to send your own position in digital mode
Set whether to transmit your station position in digital mode.
1. Press and hold the [F(SETUP)] key [TX/RX] [2 DIGITAL] [3 LOCATION
SERVICE]
2. Rotate the DIAL knob to select the desired setting.
ON
OFF
The default setting: ON
The RX and TX operating modes are automatically selected
from the four communication modes to match the received
signal.
The RX mode is automatically selected from the four com-
munication modes to match the received signal. The TX
mode is automatically changed to the "FM" mode.
The RX mode is automatically selected from the four com-
munication modes to match the received signal. The TX
mode is automatically changed to the "DN" mode.
The remote station information is not displayed.
Set the time duration to display the remote station information.
The remote station information is continuously displayed.
Send the location information of your station.
Do not send the location information of your station.
47