3. The kind of printer error will be displayed. If happens two or more troubles, the number of troubles is
displayed on the right upper of the LCD. For example, when "Heater error" and "Drum Fuse Error" has
occurred, the LCD shows 2.
Service Call
Heater Error
4. Press
to show the other printer error.
5. Press STOP to exit this mode.
Note:
See page 4-20 for the printer error messages and an explanation of each are outlined.
3.9 Print Program Mode List
This mode causes the unit to print a summary list of the unit's programming modes. To print the program
mode list press Program key, *, 8. After printing the unit will return to standby.
Program List
** Printing **
3.10 Test Modes
This mode offers the ability to print a test pattern and monitor certain unit output functions. Included are
followings.
1. Press Program key, *, 9 to enter the test mode.
Press
to scroll through the test modes.
Life Monitor
Printer Test
Feeder Test
BackgroundLevel Test
Set Background Level
2. Press ENTER to entry the desired test mode.
:2
How many troubles
/
/Enter
/
/Enter
/
/Enter
/
/Enter
/
/Enter
3-64