Features And Functions - Muratec MFX-2500 Field Engineering Manual

Muratec MFX-2500

1.8 Features and Functions

1.8.1 Dialer
Item
Autodialer
Programmable one-touch.
Soft key
Macro key
Telephone index
Type of dialing
Dialing pause time
Redial
PIN access
On-hook dialing
Dialing in the event of a
power failure
Specifications / Comments
300 total; 78 one-touch, 222 speed dial.
(Up to 40 digits per location; 24 characters per location ID)
6 total
The programmable one-touch keys simplify complex fax operation.
The following multi-step operations can be programmed.
Fax communication
Delayed transmission
Broadcasting
Regular polling
Batch transmission
F-code transmission
F-code polling
4 total
Fax communication
Set the following On/Off operation into the Soft keys.
Memory transmission on/off (Default setting)
Transmission confirmation stamp on/off (Default setting)
Confirmation report on/off (Default setting)
Hook/Call request (Default setting)
Cover page on/off
TTI on/off
Copy
Pressing the soft key, the following copy setting display will appear.
Combine
Repeat
Series copy
Erasing boarder
Erasing center
Binding margin
Directional magnification
Positive/negative copy
Duplex (with optional Duplex unit)
Booklet (with optional Duplex unit)
6 total
The macro keys simplify multiple fax or copy operations.
Up to 60 steps can be programmed in one macro key.
Up to 130 characters can be entered in the title of the macro key.
Select autodialer entries in LCD by Location ID name.
Tone or pulse (10 pps)
2-10 seconds. (Initial setting: 2 seconds)
Auto redial in fax mode, programmable for 2 to 15 attempts (default: 2) at
1 to 5 minutes intervals (default: 1); manual last-number redial.
Available
Available
Works only if the handset is attached.
The fax can receive a telephone call, but it cannot send or receive a fax
message.
1-9
General Description