Interlock Switch - Muratec MFX-2500 Field Engineering Manual

5.2.5 Interlock switch

1. Remove the Tx cover. (See 5.2.1)
2. Remove one screw and one connector, then remove the Interlock switch.
Interlock switch
5.2.6 PCB DS2
1. Remove the Tx cover. (See 5.2.1)
2. Remove two screws and one connector, then remove the PCB DS2.
DS2
Note: The auto adjustment of DS2 (see page 3-129) must be made when you replace the DS2.
5-22