4. Select the relay you want to set to ON by cursor key, then press [Enter]. When it is set to ON, it will be
shaded. If you want to set it to OFF, press [Enter] again.
5. Press RESET to return to standby.
3.12.2 Tonal Signal Test
The tonal signal test permits the machine's output tones to be monitored.
Note: To monitor the tones, an external monitoring device must be connected to the telephone line jack.
1. Press MENU, *, C.
2. Press the numeric keypad 0 (zero) to select the optional board number for the machine.
To select the optional board number for the second phone line, press 1 (one).
Then press [Enter].
3-132