Adjustment; Memory Switches Adjustment - Muratec MFX-2500 Field Engineering Manual

Second phone line

6.8.3 Adjustment

Important: These memory switches and unique switches only for AL-250 are shown in this section.

6.8.3.1 Memory Switches Adjustment

If necessary, you must set the following switches.
1. From Fax standby mode, press MENU, *, 1.
2. Select the desired memory switch by pressing a one-touch key plus a number on the keypad.
3. Press [Enter].
Memory Switch B:0 – Transmission
Initial
Switch
Setting
7 1 Refer to Section 3 of this
FEM
6 0 Refer to Section 3 of this
FEM
5 0 Refer to Section 3 of this
FEM
4 0 Refer to Section 3 of this
FEM
3 1 Maximum transmit speed, kbps
2.4 4.8 7.2 9.6 12 14.4 16.8 19.2 21.6 24 26.4 28.8 31.2 33.6
0
2 1 0
1 0 0
0 1 0
Note: This setting effect for both phone line 1 and 2.
Memory Switch C:0 – Reception
Initial
Switch
Setting
7 0 Refer to Section 3 of this
FEM
6 0 Refer to Section 3 of this
FEM
5 0 Factory use only
4 0 Factory use only
3 1 Receive speed (kbps)
Maximum receive speed may be slowed to compensate for poor phone lines.
2 1
2.4 4.8 7.2 9.6 12 14.4 16.8 19.2 21.6 24 26.4 28.8 31.2 33.6
1 0 0
0
0 1 0
0
Note: This setting effect for both phone line 1 and 2.
Adjust
0 0 0 0 0 0
0 0 0 1 1 1
0 1 1 0 0 1
1 0 1 0 1 0
Adjust
0 0 0 0 0 0
0 0 0 1 1 1
0 1 1 0 0 1
1 0 1 0 1 0
Usage/Comments
0 1 1 1 1
1 0 0 0 0
1 0 0 1 1
1 0 1 0 1
Usage/Comments
0 1 1 1 1
1 0 0 0 0
1 0 0 1 1
1 0 1 0 1
6-93
Options
1 1
1 1
0 0
0 1
1 1
1 1
0 0
0 1