Mirror Carriage Transfer Mode - Muratec MFX-2500 Field Engineering Manual

3. Select "C. DTMF" by cursor key, then press [Enter].
4. Select the desired DTMF tone by cursor key, then press [Enter].
The output signal will begin. To stop outputting the DTMF tone, press STOP.
5. To select another DTMF tone, repeat step 4.
Otherwise, proceed to step 6.
6. Press RESET to return to standby.

3.13 Mirror Carriage Transfer Mode

Important: The machine's mirror carriage is fixed using the two screws at transferring.
When installing the machine, remove the two mirror carriage mounting screws and turn the
power on. Then perform this mode.
1. Press MENU, *, E.
2. Select "OFF" by cursor key. Then press [Enter] to turn off the transport mode. The mirror carriage will
move to home position.
Important: If reshipping, turn on this mode to move the mirror carriage to the transport position. Then
power off and mount the mirror carriage using two transport screws.
3-135