Fusing Section - Muratec MFX-2500 Field Engineering Manual

5.1.5 Fusing Section

(1) Removal of the Fusing Unit
1. Open the Side Cover.
2. Remove the Front Cover.
3. Unplug one connector at the front.
4. Open the Exit Cover and unplug two connectors in the rear.
5. Close the Exit Cover and remove two screws and the Fusing Unit.
(2) Removal of the Fusing Roller Heater Lamp, Fusing Right Roller, Fusing Left Roller, Fusing
Roller Thermistor, Fusing Roller Thermostat, and Fusing Roller Heater Lamp Fuse
1. Open the Exit Cover.
2. Remove one screw and the Fusing Front Cover.
5-14