Adjustment Of The Position Of Mirror Carriage A And B - Muratec MFX-2500 Field Engineering Manual

Hide thumbs Also See for MFX-2500:

Table of Contents

5.3.12 Adjustment of the position of Mirror carriage A and B

1. Temporarily loosen the screw of the belt retainer to move the mirror carriages.

2. Move the Mirror carriage A and B to the right end until they stop. Secure the carriages at this position.

3. Tighten the screw of the belt retainer.

Mirror carriage B

Mirror carriage A

Note: After this adjustment, confirm the copy image quality and adjust the image deformation, if

Table of Contents