Mirror Carriage A Assembly - Muratec MFX-2500 Field Engineering Manual

Hide thumbs Also See for MFX-2500:

Table of Contents

5.2.40 Mirror carriage A assembly

1. Remove the Right and Left cover. (See 5.2.26.)

2. Remove Size cover H. (See 5.2.33.)

3. Remove FBS glass. (See 5.2.33.)

4. Remove Panel assembly. (See 5.2.24.)

5. Move the Mirror carriage A to right end. Then remove the screws from the belt retainer.

Mirror carriage A

6. Remove the blind sheet.

7. Move the Mirror carriage A assembly to the center. Then remove the belt retainers.

8. Remove one screw and FPC bracket.

9. Disconnect the connector of exposure lamp.

Belt retainer

Mirror carriage B

10.Remove the Mirror carriage A assembly.

Table of Contents