Reassemble The Mirror Carriage A And B - Muratec MFX-2500 Field Engineering Manual

5.2.44 Reassemble the Mirror carriage A and B

1. Put on the Mirror carriage A and B.
Mirror carriage B
2. Temporarily attach the belt retainer with screw loosely.
3. Move the Mirror carriage A and B to the right end until they stop.
4. Tighten the screws of the retainer to secure the Mirror cartridge A and B.
Mirror carriage B
Note: Whenever the Mirror carriage A and B has been removed, make the image deformation
adjustment. (See page 5-91.)
Mirror carriage A
5-57
Mirror carriage A