Muratec MFX-2500 Field Engineering Manual page 400

Options
6.5.2.1.3 Removal of the Paper Take-Up Rolls
1. Remove the Paper Take-Up Unit.
2. Unplug one connector of Lift-Up Sensor 1 and another of
Take-Up Clutch 1 of the right Paper Take-Up Roll Assy.
3. Unhook two springs.
4. Remove one screw and, while removing the timing belt toward
the clutch side, remove the right Paper Take-Up Roll Assy.
When mounting the right Paper Take-Up Roll Assy, fit the ends
of the assy into position as shown.
5. Unplug one connector of Lift-Up Sensor 2 and another of
Take-Up Clutch 2 of the left Paper Take-Up Roll Assy.
6. Unhook two springs.
7. Remove one screw and the left Paper Take-Up Roll Assy.
6-46
Large Capacity Cassette