Display Of The Software Version - Muratec MFX-2500 Field Engineering Manual

Options

6.8.2 Display of the Software Version

You can see the current software version using the life monitor.
1. From standby mode, press MENU, *, 9.
2. Select "A. Life Monitor".
3. Press [Enter]. The software version will be shown on the top line of the LCD.
4. Press optional board number using the numeric keypad as shown in the following table.
Software version
Flash ROM on Main control PCB
Built-in CPU ROM
The first optional kit
The second optional kit
The third optional kit
5. Press RESET to exit and return to the standby mode.
Numeric keypad
0
* (asterisk)
1
2
3
6-92
Second phone line