Machine Parameter Adjustment - Muratec MFX-2500 Field Engineering Manual

3.2 Machine Parameter Adjustment

3.2.1 Setting the Machine Parameters
These switches are used to program internal machine parameters. The primary back up battery maintains
these settings if power is lost.
1. From standby, press MENU, *, 0.
2. Select the desired parameter by cursor key or by pressing a one-touch key plus a number on the
keypad. For example, to access parameter B:1, press one-touch "B" plus the number "1" on the
numeric keypad.
3. Press [Enter].
4. To navigate through the machine parameter settings:
Press or
Press 0 or 1 on the numeric keypad to change the bit value.
Press [Enter] to save the setting of the displayed parameter and advance to the next parameter.
Press [Cancel] not to save the setting of the displayed parameter.
5. If you want to set other parameters, repeat step 3-5. Otherwise, proceed to step 6.
6. Press RESET to return the machine to standby.
3.2.2 Clearing the Machine Parameters
Resets the machine parameters to factory defaults.
1. From standby, press MENU, *, 0, [Clear].
3. Press [Enter]. The machine parameters will reset to factory defaults.
Note: To finish the operation without clearing the parameters, press [Cancel].
of the cursor key to move the cursor.
3-2