Elapsed Time - Kodak 9520 User Manual

Code Function Code Name
F17

Elapsed Time

F18 Display Contrast
F19 Display Language
F20 Measurement System
F21 Change Time
F22 Change Date
F23 Time and Date Display
F34 Operator ID Number
F37 Scanner Calibration
F38 Scanner End-of-Job
F39 Printer Character Shift
(for Document Printer 12)
F39 Print Contrast
(for Super12 Document
Printer)
4-6
Allows you to display the number of hours the motor,
transport and main power have been running, in addition
to the non-resettable document count. Press the Right
arrow to view the meters.
Meter A — displays motor-on hours
Meter B — displays transport-on hours
Meter C — displays main power-on hours
Meter D — displays document count
Allows you to adjust the contrast of the status display.
Press the Up arrow to increase the contrast or press the
Down arrow to decrease the contrast, then press Enter.
Allows you to choose your preferred language. Press the
arrow key to toggle between two available options.
Allows you to choose your preferred measurement
system. Press the arrow key to toggle between two
available options.
Allows you to change the time. Enter the new time in the
format illustrated and press Enter.
Allows you to change the date. Enter the new date in the
format illustrated and press Enter.
Allows you to view the current time and date.
Allows you to display the current operator ID number
and/or change to a new operator ID number. Enter a new
operator ID up to 3 digits and press Enter.
Allows you to initiate the calibration process required
before scanning documents. To do this, feed a calibration
target into the scanner.
Allows you to signal the host computer that the last
document of the job has been fed into the transport.
Allows you to select which set of ink jets will be used to
print each character. Enter 1 to select the left set of ink
jets, enter 2 to select the center set of ink jets, or enter 3
to select the right set of ink jets, then press Enter.
Allows you to increase or decrease the amount of ink put
on the document. Press the Up arrow for more ink and
press the Down arrow for less ink. Incremental values
are: 12, 25, 37, 50, 62, 75, 87 and 100%.
Description
A-61139 March 2000