Kodak 9520 User Manual page 35

Code Function Code Name
F58 Endorser Mode
F59 Endorser Print Position
F60 Bar Code Reading 1
On/Off
F62 Bar Code/Patch Reading
Confirmation Tone
F63 Bar Code Reader
Confirmation Tone
F64 Omit Bar Code Reading on
the Next Document Only
F65 Bar Code Test
F66 Partial Bar Code Reading
On/Off
F70 Length Checking On/Off
F71 Omit Length Checking on
the Next Document Only
A-61139 March 2000
Allows you to display the current Endorser mode and/or
change the Endorser mode. To change to Endorser
mode, press any arrow key to toggle between the two
available options and then press Enter.
Allows you to specify how far from the leading edge of the
document the endorsement will appear. Press the Up
arrow to increment the starting print position by 1 inch
(25 mm), press the Down arrow to decrement the starting
print position by 1 inch (25 mm). Press the Right arrow to
increment the starting print position by 0.125-inch (3 mm),
or press the Left arrow to decrement the starting print
position by 0.125-inch (3 mm), then press Enter.
Allows you to turn bar code reading on or off. Enter 1 to
turn on or 0 to turn off and then press Enter.
Allows you to turn the bar code/patch reading
confirmation tone on or off. Enter 1 to turn on or 0 to turn
off and then press Enter.
Allows you to turn the confirmation tone on or off which
informs you when the Bar Code Reader has successfully
read a bar code document. Enter 1 to turn on or 0 to turn
off and then press Enter.
Allows you to omit bar code reading on the next document
scanned. Bar Code Reading will resume on subsequent
documents. Enter 1 to turn on or 0 to turn off, then press
Enter.
Allows you to perform a test to verify the operation of the
Bar Code Reader. Enter the number of the bar code test
you want to perform: 1=Evaluate; 2=Display; 3=%Kodak;
or 4=%Norm, then press Enter.
Allows you to turn partial bar code reading on or off. Enter
1 if you want the scanner to read bar codes with a start
character (and n characters beyond the start character
that can be read) even if no end character is encountered.
Enter 0 to turn off partial bar code reading off, then press
Enter.
Allows you to turn length checking on or off which
monitors the length of the document(s) scanned using
predefined maximum allowable lengths. Enter 1 to turn on
or 0 to turn off and then press Enter.
Allows you to omit length checking on the next document
scanned. Length monitoring will resume on subsequent
documents. Enter 1 to turn on or 0 to turn off, then press
Enter.
Description
4-9